Titanium Gr.5 Round Bars, Titanium Gr.5 Rod, Gr.5 Titanium Round Bar

This steel may be in addition strengthened through cold working previous to precipitation hardening. This UNS R56400 Flat Bars is feasible, however, to expand a magnetic layer at the surface of the material at some stage in processing. Resistance to hydrogen sulphide makes this steel beneficial in sour-fueloline environments making it extraordinarily famous within the oil patch. This steel is utilized in Pump Shafts, Valve Components, and more. The thermal processing on this steel used to impact precipitation is generally known as age hardening or ageing. This steel have an extra tendency in the direction of strain-corrosion cracking in a few environments while within the age-hardened condition.

This steel has the mixture of very low corrosion rates in excessive-pace sea water and excessive strength.This Titanium WNR 3.7165 Square Bars is mainly appropriate for shafts of centrifugal pumps in marine service. Self-age-hardening could be installation within the cast a part of this product, main to strain and feasible cracking. The addition of aluminium and titanium to an already sturdy nickel-copper base on this product adds strength and hardness. This product has high-quality resistance to chloride-ion strain-corrosion cracking. This product may be in addition strengthened through cold working earlier than the precipitation hardening.

The strength of this product is maintained to 1200 Degree F however remains ductile and hard right all the way down to temperatures of four hundred Degree F. Aluminium and copper on this product perhaps selectively oxidized at some stage in heating, leaving a magnetic nickel-rich film at the outdoor of the piece. ThisTi 6AL - 4V Threaded Bars is immune to corrosion and acids, due to the fact a few alloys can face up to in natural oxygen. This product gives high-quality corrosion resistance in a number environments such as hydrofluoric acid and sulphuric acid. In stagnant or sluggish-shifting sea water, fouling may also arise observed through pitting on this product, however this pitting slows down after a reasonably fast preliminary attack.

Dimensions	DIN, EN, ASTM, JIS, ASME, BS, AISI
Standard	ASTM A348, ASME SA348
Hex Bar size	2-100mm A/F
Round bar size	Diameter: 3-~800mm
Flat bar size	Thickness: 2 -100mm
Width: 10 to 500mm
Angle bar size	3mm20mm20mm~12mm100mm100mm
Square bar size	4 to 100mm
Channel Bar	80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Rectangular Bars Section	3.0 to 12.0mm thickness
Threaded Bar Billet Size	1/2 to 495mm Diameter
Rectangles Size	33 x 30mm to 295 x 1066mm
Hollow Bar	32mm OD x 16mm ID to 250mm OD x 200mm ID)
Tolerance	H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Finish	Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Surface	Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished
Condition	Hardened & tempered, annealed
Technique	Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod
Processing	Bar cutting to 650mm
Form	Rod, Round, Channel Bar, T-Bar, Flat Bar, Precision Ground Bar, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bar, Ingot, Billet, I/H Bar, Forging etc.

Dimensions

DIN, EN, ASTM, JIS, ASME, BS, AISI

Standard

ASTM A348, ASME SA348

Hex Bar size

2-100mm A/F

Round bar size

Diameter: 3-~800mm

Flat bar size

Thickness: 2 -100mm

Width: 10 to 500mm

Angle bar size

3mm*20mm*20mm~12mm*100mm*100mm

Square bar size

4 to 100mm

Channel Bar

80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness

Rectangular Bars Section

3.0 to 12.0mm thickness

Threaded Bar Billet Size

1/2 to 495mm Diameter

Rectangles Size

33 x 30mm to 295 x 1066mm

Hollow Bar

32mm OD x 16mm ID to 250mm OD x 200mm ID)

Tolerance

H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

Finish

Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black

Surface

Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished

Condition

Hardened & tempered, annealed

Technique

Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod

Processing

Bar cutting to 650mm

Form

Rod, Round, Channel Bar, T-Bar, Flat Bar, Precision Ground Bar, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bar, Ingot, Billet, I/H Bar, Forging etc.

STANDARD	UNS	WNR.
Titanium Gr 5	R56400	3.7165

STANDARD

UNS

WNR.

Titanium Gr 5

R56400

3.7165

Diameter or Width (mm)	Weight per meter	Sectional Area	Perimeter
5.0	0.20	0.15	0.25	0.20	2.0	1.57
5.5	0.24	0.19	0.30	0.24	2.2	1.78
6.0	0.28	0.22	0.36	0.28	2.4	1.88
7.0	0.38	0.30	0.49	0.38	2.8	2.20
8.0	0.50	0.39	0.64	0.50	3.2	2.51
9.0	0.64	0.50	0.81	0.64	3.6	2.83
10	0.73	0.63	1.00	0.79	4.0	3.14
11	0.95	0.75	1.21	0.95	4.4	3.46
12	1.13	0.89	1.44	1.13	4.8	3.77
14	1.54	1.21	1.96	1.54	5.6	4.40
16	2.01	1.58	2.56	2.01	6.4	5.03
18	2.54	2.00	3.24	2.54	7.2	5.65
20	3.14	2.47	4.00	3.14	8.0	6.28
22	3.80	2.98	4.84	3.80	8.8	6.91
25	4.91	3.85	6.25	4.91	10.0	7.85
28	6.15	4.83	7.84	6.16	11.2	8.80
32	8.04	6.31	10.24	8.04	12.8	10.05
36	10.17	7.99	12.96	10.18	14.4	11.31
40	12.56	9.86	16.00	12.57	16.0	12.57
45	15.90	12.49	20.25	15.90	18.0	14.14
50	19.62	15.41	25.00	19.64	20.0	15.71
56	24.62	19.34	31.36	24.63	22.4	17.59
63	31.16	24.47	36.69	31.17	25.2	19.79
71	39.57	31.08	50.41	39.59	28.4	22.31
80	50.24	39.46	64.00	50.27	32.0	25.13

Diameter or
Width
(mm)

Weight per meter

Sectional Area

Perimeter

Square
(kg)

Round
(kg)

Square
(cm²)

Round
(cm²)

Square
(cm)

Round
(cm)

5.0

0.20

0.15

0.25

0.20

2.0

1.57

5.5

0.24

0.19

0.30

0.24

2.2

1.78

6.0

0.28

0.22

0.36

0.28

2.4

1.88

7.0

0.38

0.30

0.49

0.38

2.8

2.20

8.0

0.50

0.39

0.64

0.50

3.2

2.51

9.0

0.64

0.50

0.81

0.64

3.6

2.83

0.73

0.63

1.00

0.79

4.0

3.14

0.95

0.75

1.21

0.95

4.4

3.46

1.13

0.89

1.44

1.13

4.8

3.77

1.54

1.21

1.96

1.54

5.6

4.40

2.01

1.58

2.56

2.01

6.4

5.03

2.54

2.00

3.24

2.54

7.2

5.65

3.14

2.47

4.00

3.14

8.0

6.28

3.80

2.98

4.84

3.80

8.8

6.91

4.91

3.85

6.25

4.91

10.0

7.85

6.15

4.83

7.84

6.16

11.2

8.80

8.04

6.31

10.24

8.04

12.8

10.05

10.17

7.99

12.96

10.18

14.4

11.31

12.56

9.86

16.00

12.57

16.0

12.57

15.90

12.49

20.25

15.90

18.0

14.14

19.62

15.41

25.00

19.64

20.0

15.71

24.62

19.34

31.36

24.63

22.4

17.59

31.16

24.47

36.69

31.17

25.2

19.79

39.57

31.08

50.41

39.59

28.4

22.31

50.24

39.46

64.00

50.27

32.0

25.13

Metric	US Bar	ASTM/ Canadian	Japanese
Bar Size	Diam. (mm)	Bar Size	Diam. (Inch)	Bar Size	Diam. (mm2)	Bar Size	Diam. (mm)
5	5	#2	0.250	10M	100	6	6
5.5	5.5	#3	0.375	15M	200	10	10
6	6	#4	0.500	20M	300	13	13
7	7	#5	0.625	25M	500	16	16
8	8	#6	0.750	30M	700	19	19
9	9	#7	0.875	35M	1000	22	22
10	10	#8	1.000	45M	1500	25	25
11	11	#9	1.125	55M	2500	29	29
12	12	#10	1.250			32	32
14	14	#11	1.375			35	35
16	16	#12	1.500			38	38
18	18	#13	1.625			41	41
20	20	#14	1.750			44	44
22	22	#15	1.875			48	48
25	25	#16	2.000			51	51
28	28	#18	2.250			57	57
32	32
36	36
40	40
44	44
50	50

Metric

US Bar

ASTM/ Canadian

Japanese

Bar Size

Diam. (mm)

Bar Size

Diam. (Inch)

Bar Size

Diam. (mm2)

Bar Size

Diam. (mm)

0.250

10M

100

5.5

0.375

15M

200

0.500

20M

300

0.625

25M

500

0.750

30M

700

0.875

35M

1000

1.000

45M

1500

1.125

55M

2500

#10

1.250

#11

1.375

#12

1.500

#13

1.625

#14

1.750

#15

1.875

#16

2.000

#18

2.250

Size in Inches	Wt per Ft	Wt per 12′
3/16″	0.104	1.248
1/4″	0.180	2.160
5/16″	0.290	3.480
3/8″	0.420	4.920
7/16″	0.560	6.72
1/2″	0.740	8.880
9/16″	0.930	11.16
5/8″	1.150	13.80
11/16″	1.390	16.68
3/4″	1.660	19.92
13/16″	1.950	23.40
7/8″	2.300	27.60
15/16″	2.600	31.20
1″	2.90	34.80
1-1/16″	3.30	39.60
1-1/8″	3.700	44.40
1-1/4″	4.600	55.20
1-5/16″	5.100	61.20
1-3/8″	5.600	67.20
1-7/16″	6.100	73.20
1-1/2″	6.600	79.20
1-5/8″	7.800	93.60
1-3/4″	9.030	108.36
1-7/8″	10.400	124.80
2″	11.80	141.60
2-1/4″	14.920	179.04
2-3/8″	16.920	203.04
2-1/2″	18.42	221.04
3″	26.53	318.36

Size in Inches

Wt per Ft

Wt per 12′

3/16″

0.104

1.248

1/4″

0.180

2.160

5/16″

0.290

3.480

3/8″

0.420

4.920

7/16″

0.560

6.72

1/2″

0.740

8.880

9/16″

0.930

11.16

5/8″

1.150

13.80

11/16″

1.390

16.68

3/4″

1.660

19.92

13/16″

1.950

23.40

7/8″

2.300

27.60

15/16″

2.600

31.20

1″

2.90

34.80

1-1/16″

3.30

39.60

1-1/8″

3.700

44.40

1-1/4″

4.600

55.20

1-5/16″

5.100

61.20

1-3/8″

5.600

67.20

1-7/16″

6.100

73.20

1-1/2″

6.600

79.20

1-5/8″

7.800

93.60

1-3/4″

9.030

108.36

1-7/8″

10.400

124.80

2″

11.80

141.60

2-1/4″

14.920

179.04

2-3/8″

16.920

203.04

2-1/2″

18.42

221.04

3″

26.53

318.36

Flat Bar Sizes in mm	Flat Bar Size (inch)	Flat Bar Thickness (mm)	Flat Bar Thickness (in Inches)
22	7/8	17 & 18	2/3 – 5/7
25	1	5 to 20	3/16 – 4/5
30	1-3/16	5 to 20	3/16 – 4/5
32	1-1/4	6 to 20	1/4 – 4/5
35	1-3/8	5 to 20	3/16 – 3/16
40	1-4/7	5 to 25	3/16 – 1
45	1-7/9	5 to 25	3/16 – 1
47	1-6/7	17,25 & 32	2/3, 1 & 1-1/4
50	2	5 to 32	3/16 – 1-1/4
55	2-1/16	5 to 25	3/16 – 1
57	2-1/4	32	1-1/4
60	2-3/8	5 to 35	3/16 – 1-3/8
63	2-1/2	10 to 30	3/8 – 1-3/16
65	2-5/9	10 to 30 & 35	3/8 – 1-3/16, & 1-3/8
70	2-3/4	6 to 25 & 40	1/4 – 1, & 1-4/7
75	3	8 to 25	5/16 – 1
80	3-1/8	8 to 20	5/16 – 4/5
90	3-1/2	8 to 20	5/16- 4/5
100	4	8, 10, 12	5/16, 3/8, 1/2

Flat Bar Sizes in mm

Flat Bar Size (inch)

Flat Bar Thickness (mm)

Flat Bar Thickness (in Inches)

7/8

17 & 18

2/3 – 5/7

5 to 20

3/16 – 4/5

1-3/16

5 to 20

3/16 – 4/5

1-1/4

6 to 20

1/4 – 4/5

1-3/8

5 to 20

3/16 – 3/16

1-4/7

5 to 25

3/16 – 1

1-7/9

5 to 25

3/16 – 1

1-6/7

17,25 & 32

2/3, 1 & 1-1/4

5 to 32

3/16 – 1-1/4

2-1/16

5 to 25

3/16 – 1

2-1/4

1-1/4

2-3/8

5 to 35

3/16 – 1-3/8

2-1/2

10 to 30

3/8 – 1-3/16

2-5/9

10 to 30 & 35

3/8 – 1-3/16, & 1-3/8

2-3/4

6 to 25 & 40

1/4 – 1, & 1-4/7

8 to 25

5/16 – 1

3-1/8

8 to 20

5/16 – 4/5

3-1/2

8 to 20

5/16- 4/5

100

8, 10, 12

5/16, 3/8, 1/2

Square bar Size	KG’s per Metre	Standard Length (metres)	Colour Code
10 x 10	0.81	6.0	Yellow
12 x 12	1.16	6.0	Pink
16 x 16	2.06	6.0	Grey
20 x 20	3.22	6.0	Green
25 x 25	5.03	6.0	Purple
32 x 32	8.24	6.0	Orange
40 x 40	12.8	6.0	Yellow
50 x 50	20.12	6.0	Green

Square bar Size

KG’s per Metre

Standard Length (metres)

Colour Code

10 x 10

0.81

6.0

Yellow

12 x 12

1.16

6.0

Pink

16 x 16

2.06

6.0

Grey

20 x 20

3.22

6.0

Green

25 x 25

5.03

6.0

Purple

32 x 32

8.24

6.0

Orange

40 x 40

12.8

6.0

Yellow

50 x 50

20.12

6.0

Green

Diameter	Weight Chart	Dia	Weight Chart
(mm)	per metre (kg)	(in)	per metre (kg)
3mm	0.06	1/8″	0.06
4mm	0.10	3/16″	0.14
5mm	0.16	1/4″	0.25
6mm	0.22	5/16″	0.39
7mm	0.30	3/8″	0.56
8mm	0.40	7/16″	0.77
10mm	0.62	1/2″	1.00
12mm	0.89	9/16″	1.22
14mm	1.22	5/8″	1.56
15mm	1.40	11/16″	1.89
16mm	1.59	3/4″	2.25
18mm	2.01	7/8″	3.07
20mm	2.48	1″	4.03
22mm	3.00
24mm	3.57
25mm	3.88

Diameter

Weight Chart

Dia

Weight Chart

(mm)

per metre (kg)

(in)

per metre (kg)

3mm

0.06

1/8″

0.06

4mm

0.10

3/16″

0.14

5mm

0.16

1/4″

0.25

6mm

0.22

5/16″

0.39

7mm

0.30

3/8″

0.56

8mm

0.40

7/16″

0.77

10mm

0.62

1/2″

1.00

12mm

0.89

9/16″

1.22

14mm

1.22

5/8″

1.56

15mm

1.40

11/16″

1.89

16mm

1.59

3/4″

2.25

18mm

2.01

7/8″

3.07

20mm

2.48

1″

4.03

22mm

3.00

24mm

3.57

25mm

3.88

Grade	Al	Fe	O	Ti	V
Titanium Gr 5	6	0.25	0.2	90	4

Grade

Titanium Gr 5

0.25

0.2

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Titanium Gr. 5	4.43 g/cm3	1632 °C (2970 °F)	Psi – 138000 , MPa – 950	Psi – 128000 , MPa – 880	14 %

Element

Density

Melting Point

Tensile Strength

Yield Strength (0.2%Offset)

Elongation

Titanium Gr. 5

4.43 g/cm3

1632 °C (2970 °F)

Psi – 138000 , MPa – 950

Psi – 128000 , MPa – 880

14 %

CD	Cold drawn	P	Polished
BD	Bright drawn	SRE	Slit rolled edge
CG	Centreless ground	HF	Hot finished
CF	Cold finished	HRAP	Hot rolled annealed and pickled
P&T	Peeled and turned	RT	Rough turned/peeled
ST	Smooth turned	PR	Peeled and reeled

Titanium Gr.5 Round Bars

Gr.5 Titanium Round Bars, Titanium Gr.5 Bright Bar, ASTM A348 Titanium Gr.5 Hex Bar, Gr.5 Titanium Rectangular Bar, Titanium Gr.5 Hollow Bars Supplier in Mumbai, India.

Grade

UNS

WERKSTOFF NR.

ASTM / ASME

Buy Gr.5 Titanium Round Bar, Titanium Gr.5 Square Bar, Titanium Gr.5 Flat Bar, UNS R56400 Threaded Bar, ASTM A348 Type Gr.5 Rod, titanium alloy Gr.5 Rods Dealer, DIN 3.7165 Forged Bar, Ti alloy Gr.5 Bars, Titanium Gr.5 Hot Rolled Bar Manufacturer in India.

Standard Quality Specification Of Titanium Gr.5 Round Bars

Available Types Of Titanium Gr.5 Round Bars

Titanium Gr.5 Flat Bar

Titanium Gr.5 Square Bar

Titanium Gr.5 Bright Bar

Titanium Gr.5 Hex Bar

Titanium Gr.5 Rectangular Bar

Titanium Gr.5 Forged Bar

Equivalent Grade Of Gr.5 Titanium Round Bars

Titanium Gr.5 Round Bars Surface Finish

Manufacturer of Titanium Gr.5 Round Bars, Titanium Gr.5 Hex Bar Wholesaler, Gr.5 Titanium Flat Bar Price in India.

Check ASTM A348 Titanium Gr.5 Round Bars & Gr.5 Titanium Threaded Bar Weight Chart & Dimensions.

Dimensions Of Hot Rolled Titanium Gr.5 Round Bar

Titanium Gr.5 Round Bar Size Chart

Standard Sizes Titanium Gr.5 Hex Bar

Titanium Gr.5 Flat Bar Size

Size chart of Titanium Gr.5 Square Bar

Gr.5 Titanium Round Bar Weight Chart

Chemical Composition of Gr.5 Titanium Round Bars

Mechanical Properties of Titanium Gr.5 Round Bars

Other Types Of Titanium Gr.5 Round Bars

Titanium Gr.5 Round Bars SUPPLYING TO FOLLOWING REGIONS & COUNTRIES

Official info:

LOCATION