SS 310H Pipe Fittings, Stainless Steel 310H Elbow, 310H Stainless Steel Butt weld Fittings

In the work-hardened circumstance, this product increase better tensile strength than the opposite strong austenitic grades. However, for applications in which the custom twine basket or rack will need to deliver a load via excessive temperatures, or could be uncovered to very corrosive situations, this Stainless Steel UNS S31009 End Cap Pipe Fittings will commonly be the higher alternative for beneficial lifestyles and long-time period cost-effectiveness. This alloy is non-magnetic within the annealed circumstance however will become magnetic as an end result of cold working. This alloy has an oxidation weight advantage in temperatures over 1600 Degree F (871 Degree C). Resistance of this alloy to atmospheric corrosion and street de-icing salt is excellent. Post-manner annealing for this alloy is needed to re-gain most corrosion resistant properties. This alloy reveals suitable oxidation resistance for intermittent offerings as much as 840 Degree C and for non-stop carrier as much as 900 Degree C. Stainless Steel WNR 1.4845 Swage Nipple Pipe Fittings gives excessive hardness and strength for structural applications are accomplished via cold working. The managed evaluation of this alloy permits it to maintain enough ductility in situations to be roll or brake formed into aircraft, architectural and in particular rail automobile structural components.

This alloy gives excessive strength for roll formed structural components, and low work hardening rate grade for cold heading fasteners. Its excessive strength and corrosion resistance makes this alloy flexible alloy for a huge range of applications. The corrosion resistance of 310H Stainless Steel Barrel Nipple Pipe Fittings is for the reason that of the shielding surface formed while in touch in company of water. Crevice corrosion can arise in additives in seawater while they are regionally starved of oxygen at a joint or below connected biofouling. It suggests the coolest tolerance of the alloys to this sort of assault, giving these steels with best properties over not the same materials of identical corrosion resistance.

Specifications	ASTM A403 / ASME SA403
Dimensions	ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Size	Seamless Fittings: 1/2" - 10" Welded Fittings: 1/2" - 48"
Thickness	SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Manufacturing Standards	ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011, DN15-DN1200 BS : BS4504, BS4504, BS1560, BS10 JIS : JIS B2311, JIS B2312, JIS B2313, JIS B2316 GOST : GOST 17375, GOST 17376, GOST 30753, GOST 17378, GOST 17379, GOST 17380 EN: EN10253-1, EN10253-2
Types	Seamless / ERW / Welded / Fabricated
Connection	Welding
Bending Radius	R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Elbow	Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D. Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO
Manufacturing process	Push, Press, Forge, Cast, etc.
Specialized manufacturer of	90º Elbows, Couplings, Reducers, Inserts, Caps, Nipples, 45º Elbows, Tees, Crosses, Equal Tees & Reducing Tees
Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Specifications

ASTM A403 / ASME SA403

Dimensions

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799

Size

Seamless Fittings: 1/2" - 10"
Welded Fittings: 1/2" - 48"

Thickness

SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75

Manufacturing Standards

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011, DN15-DN1200
BS : BS4504, BS4504, BS1560, BS10
JIS : JIS B2311, JIS B2312, JIS B2313, JIS B2316
GOST : GOST 17375, GOST 17376, GOST 30753, GOST 17378, GOST 17379, GOST 17380
EN: EN10253-1, EN10253-2

Types

Seamless / ERW / Welded / Fabricated

Connection

Welding

Bending Radius

R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Elbow

Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D.
Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO

Manufacturing process

Push, Press, Forge, Cast, etc.

Specialized manufacturer of

90º Elbows, Couplings, Reducers, Inserts, Caps, Nipples, 45º Elbows, Tees, Crosses, Equal Tees & Reducing Tees

Test Certificates

EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc

Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Standard Code	Standard Name
American Steel Pipe Fittings Standard
ANSI ASME SA-403	Forged Durimet pipe fittings
ANSI ASME B16.9	Factory-Made wrought steel pipe fittings
ANSI ASME B16.28	Wrought steel butt-welding short radius elbows and returns
ISO 5251	Stainless steel butt-welding fittings
MSS SP-43	Wrought stainless steel butt-welding fittings
MSS SP-75	Forging butt-welding fittings
German Steel Pipe Fittings Standard
DIN 2605	Steel butt-welding pipe fittings.elbows and bends
DIN 2615	Steel butt-welding pipe fittings.tees
DIN 2616	Steel butt-welding pipe fittings.reducers
DIN 2617	Steel butt-welding pipe fittings.caps
Japanese Steel Pipe Fittings Standard
JIS B2311	Universal steel butt-welding pipe fittings
JIS B2312	Steel butt-welding pipe fittings
JIS B2313	Steel plate butt-welding pipe fittings
Other Steel Pipe Fittings Standard
EN 1025	3 Butt-welding pipe fittings

Standard Code

Standard Name

American Steel Pipe Fittings Standard

ANSI ASME SA-403

Forged Durimet pipe fittings

ANSI ASME B16.9

Factory-Made wrought steel pipe fittings

ANSI ASME B16.28

Wrought steel butt-welding short radius elbows and returns

ISO 5251

Stainless steel butt-welding fittings

MSS SP-43

Wrought stainless steel butt-welding fittings

MSS SP-75

Forging butt-welding fittings

German Steel Pipe Fittings Standard

DIN 2605

Steel butt-welding pipe fittings.elbows and bends

DIN 2615

Steel butt-welding pipe fittings.tees

DIN 2616

Steel butt-welding pipe fittings.reducers

DIN 2617

Steel butt-welding pipe fittings.caps

Japanese Steel Pipe Fittings Standard

JIS B2311

Universal steel butt-welding pipe fittings

JIS B2312

Steel butt-welding pipe fittings

JIS B2313

Steel plate butt-welding pipe fittings

Other Steel Pipe Fittings Standard

EN 1025

3 Butt-welding pipe fittings

Nominal Diameter	O.D.For Bevel End	I.D.For End	Wall Thickness	Elbow	Tee	Reducer	Cap	180°Elbow
DN	NPS	A	B	C	M	H	E	O	K	Roughness
15-65	1/2-2 1/2	+1.6/-0.8	0.8	-12.50%	1.6	1.6	1.6	1.6	1.6	3.2	6.4	6.4	0.8
80-100	3-4	1.6	1.6	6.4
125-200	5-8	+2.4/-1.6
250-450	10-18	+4/-3.2	3.2	2.4	2.4	2.4	2.4	2.4	9.6
500-600	20-24	+6.4/-4.8	4.8	3.2	3.2	3.2	3.2	4.8	9.6
650-750	26-30
4.8	4.8	4.8	4.8
800-1200	32-48
1250-1500	50-60	+9.6/-6.4	6.4	9.6	9.6	9.6	9.6	9.6
1550-1750	62-70	+12.7/-9.6	9.6	12.7	12.7
1800-2000	72-80	+16/-12	12	16	16

Nominal Diameter

O.D.For Bevel End

I.D.For End

Wall Thickness

Elbow

Tee

Reducer

Cap

180°Elbow

NPS

Roughness

15-65

1/2-2 1/2

+1.6/-0.8

0.8

-12.50%

1.6

3.2

6.4

0.8

80-100

3-4

1.6

6.4

125-200

5-8

+2.4/-1.6

250-450

10-18

+4/-3.2

3.2

2.4

9.6

500-600

20-24

+6.4/-4.8

4.8

3.2

4.8

9.6

650-750

26-30

4.8

800-1200

32-48

1250-1500

50-60

+9.6/-6.4

6.4

9.6

1550-1750

62-70

+12.7/-9.6

9.6

12.7

1800-2000

72-80

+16/-12

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
SS 310H	-	S31009	SUS 310H	-	-	-	-

Seamless/ Welded 100% Radiography Tested
Products		Size
ASTM A403 SS 310H Elbow – Long Radius	ASTM A403 SS 310H 45° Elbow	Sizes 1/2″ – 48″
ASTM A403 SS 310H Fabricated Tee	ASTM A403 SS 310H End Cap
ASTM A403 SS 310H Reducer	ASTM A403 SS 310H Tee
ASTM A403 SS 310H 3D Elbow	ASTM A403 SS 310H 5D Elbow
ASTM A403 SS 310H Stub End	ASTM A403 SS 310H Pipe Bend
ASTM A403 SS 310H Reducing Elbow	ASTM A403 SS 310H Pipe Nipple
ASTM A403 SS 310H Reducing Cross	ASTM A403 SS 310H Eccentric Reducer
ASTM A403 SS 310H Concentric Reducer	ASTM A403 SS 310H Welded Fittings
ASTM A403 SS 310H Elbow – Short Radius	ASTM A403 SS 310H Cross

Product range and theoretical weights (kg)
DN	Schedule 10S			Schedule 40S			Schedule 80S
DN	90° Elbow	45° Elbow	Equal tee	90° Elbow	45° Elbow	Equal tee	90° Elbow	45° Elbow	Equal tee
8	0.02	0.01	0.03	0.03	0.02	0.06	0.04	0.03	0.07
10	0.03	0.02	0.05	0.03	0.02	0.03	0.06	0.04	0.09
15	0.06	0.03	0.09	0.08	0.04	0.10	0.10	0.05	0.14
20	0.07	0.03	0.13	0.08	0.04	0.17	0.11	0.05	0.20
25	0.14	0.08	0.28	0.15	0.11	0.29	0.22	0.14	0.38
32	0.23	0.11	0.49	0.26	0.17	0.59	0.40	0.23	0.68
40	0.30	0.17	0.68	0.40	0.23	0.86	0.51	0.29	1.02
50	0.50	0.25	0.85	0.70	0.4	1.28	0.91	0.59	1.59
65	0.85	0.48	1.41	1.40	0.77	2.19	1.81	0.99	3.13
80	1.25	0.63	1.77	2.20	1.08	3.31	2.97	1.50	4.45
90	1.70	0.75	2.67	2.83	1.42	4.08	4.00	2.00	5.44
100	2.10	1.08	3.46	4.47	2.09	5.27	6.18	2.81	7.71
150	5.45	2.72	8.07	10.89	5.44	10.99	16.32	8.16	13.61
200	10.20	5.33	15.65	21.54	10.77	20.91	33.11	16.56	28.12
250	18.15	9.75	26.46	38.56	19.27	35.38	51.71	25.86	49.90
300	25.80	13.62	39.46	59.42	29.71	62.14	79.38	39.69	83.91

Product range and theoretical weights (kg)
DN	Schedule 10S			Schedule 40S			Schedule 80S
DN	Con reducer	Ecc reducer	Reducing tee	Con reducer	Ecc reducer	Reducing tee	Con reducer	Ecc reducer	Reducing tee
40x.25	0.19	0.19	0.60	0.26	0.26	0.76	0.34	0.34	0.90
50x25	0.28	0.28	0.73	0.40	0.40	1.10	0.54	0.54	1.37
50x40	0.31	0.31	0.76	0.45	0.45	1.15	0.59	0.59	1.43
80x.50	0.55	0.55	1.56	1.00	1.00	2.91	1.79	1.79	3.91
100x50	0.78	0.78	2.94	1.50	1.50	4.48	1.95	1.95	6.55
100x80	0.87	0.87	3.04	1.74	1.74	4.64	2.33	2.33	6.79
150x80	1.82	1.82	6.86	3.95	3.95	9.68	5.51	5.51	11.57
150x100	1.96	1.96	7.10	4.07	4.07	11.94	5.96	5.96	11.97
200x100	3.01	3.01	13.46	6.55	6.55	17.98	9.23	9.23	24.18
200x150	3.19	3.19	14.08	6.74	6.74	18.82	10.12	10.12	25.31

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N
SS 310H	0.08 max	2 max	0.75 max	0.045 max	0.030 max	18 – 20	-	8 – 11	-

Stainless Steel 310H Pipe Fittings

310H Stainless Steel Pipe Fittings, Stainless Steel 310H Buttweld Fittings, 310H Stainless Steel 90 degree Elbow, SS 310H Pipe Fittings, ASTM A403 WP310H Elbow Supplier in Mumbai, India.

Grade

UNS

WERKSTOFF NR.

ASTM / ASME

Buy 310H Stainless Steel Reducer, Stainless Steel 310H Pipe Tee, SS 310H Pipe Cap, UNS S31009 Butt weld Fittings, SS 310H Pipe Elbow Dealer, SS 310H Pipe Fittings, ANSI B16.9 SS 310H Stub End, SS 310H 45 Degree Elbow Manufacturer in India.

Standard Quality Specification Of SS 310H Pipe Fittings

Available Types Of SS 310H Buttweld Pipe Fittings

SS 310H Elbow

SS 310H Reducer

SS 310H Stub End

SS 310H Tee

SS 310H Cross

SS 310H Pipe Cap

Equivalent Grade Of 310H Stainless Steel Pipe Fittings

ASTM A403 SS 310H Stainless Steel Pipe Fittings

Manufacturer of Stainless Steel 310H Seamless Pipe Fittings, ANSI B16.9 SS 310H Welded Fittings Wholesaler, 310H SS Pipe Bend Price in India.

Check ASTM A403 WP310H Cap & 310H Stainless Steel Buttweld Fittings Weight Chart & Dimensions.

International Standards of SS 310H Buttweld Fittings

Stainless Steel 310H Buttweld Fittings Thickness Chart

Stainless Steel 310H Pipe Fittings Tolerance Chart

Chemical Composition of 310H SS Butt weld Fittings

Mechanical Properties of SS 310H Pipe Fittings

Other Types Of Stainless Steel 310H Pipe Fittings

SS 310H Pipe Fittings SUPPLYING TO FOLLOWING REGIONS & COUNTRIES

Official info:

LOCATION

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.0 g/cm3	1400 °C (2550 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %