SS 410 Round Bars, Stainless Steel 410 Rod, 410 Stainless Steel Round Bar

In particular, this product has accurate resistance to hot corrosion in lots of environments which include molten salts. This steel may be very ductile, and has accurate weldability permitting its full-size utilization in several of applications. Due to its excessive chromium and nickel content material, this steel is advanced in maximum environments. Because of its excessive chromium and mild nickel content material, this Steel UNS S41000 Flat Bars is likewise immune to suffixation and may as nicely be utilized in reasonably carburizing atmospheres. This steel has the retention of a bigger fraction of room temperature strength than the not unusual austenitic alloys.Weld annealing on this product is simplest important in applications wherein strain hundreds are excessive.

This product has splendid formability and splendour of appearance. Corrosion on this product then takes location subsequent to grain boundaries. This product is utilized in quite a few family and commercial applications. This product reveals splendid corrosion resistance and has a excessive ease of fabrication. This Stainless Steel WNR 1.4006 Square Bars is regularly utilized in Boilers, Heat Exchangers, and Pipelines. Weldments on this product can be touchy to HAZ inter-granular corrosion in oxidizing acid environments, and to polyphonic acid SCC. This product should incorporate now no longer much less than 0.04 percentage carbon, nor extra than 0.10 percentage.

This product is a totally weldable material beneath traditional welding procedures. For severe applications, this product is not unusual to apply unique Deep Drawing Quality variants. This steel is used for tube hangers for petroleum refining and steam boilers.This product is a cheap and flexible corrosion resistant alloy appropriate for an extensive variety of standard purpose applications. This Stainless Steel Threaded Bars has first rate formability and tremendous strength. This product is good for the food industry, brewing, milk processing and wine-making. This product is a remarkable opportunity to Teflon lined aluminium cookware.This steel depletes the chromium detail of the steel for that reason decreasing its anti-corrosive / oxidation effectiveness.

Dimensions	DIN, EN, ASTM, JIS, ASME, BS, AISI
Standard	ASTM A479, ASTM A276, AMS 5511, AMS 5513, AMS 5647
Hex Bar size	2-100mm A/F
Round bar size	Diameter: 3-~800mm
Flat bar size	Thickness: 2 -100mm
Width: 10 to 500mm
Angle bar size	3mm20mm20mm~12mm100mm100mm
Square bar size	4 to 100mm
Channel Bar	80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Rectangular Bars Section	3.0 to 12.0mm thickness
Threaded Bar Billet Size	1/2 to 495mm Diameter
Rectangles Size	33 x 30mm to 295 x 1066mm
Hollow Bar	32mm OD x 16mm ID to 250mm OD x 200mm ID)
Tolerance	H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Finish	Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Surface	Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished
Condition	Hardened & tempered, annealed
Technique	Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod
Processing	Bar cutting to 650mm
Form	Rod, Round, Channel Bar, T-Bar, Flat Bar, Precision Ground Bar, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bar, Ingot, Billet, I/H Bar, Forging etc.

Dimensions

DIN, EN, ASTM, JIS, ASME, BS, AISI

Standard

ASTM A479, ASTM A276, AMS 5511, AMS 5513, AMS 5647

Hex Bar size

2-100mm A/F

Round bar size

Diameter: 3-~800mm

Flat bar size

Thickness: 2 -100mm

Width: 10 to 500mm

Angle bar size

3mm*20mm*20mm~12mm*100mm*100mm

Square bar size

4 to 100mm

Channel Bar

80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness

Rectangular Bars Section

3.0 to 12.0mm thickness

Threaded Bar Billet Size

1/2 to 495mm Diameter

Rectangles Size

33 x 30mm to 295 x 1066mm

Hollow Bar

32mm OD x 16mm ID to 250mm OD x 200mm ID)

Tolerance

H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

Finish

Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black

Surface

Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished

Condition

Hardened & tempered, annealed

Technique

Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod

Processing

Bar cutting to 650mm

Form

Rod, Round, Channel Bar, T-Bar, Flat Bar, Precision Ground Bar, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bar, Ingot, Billet, I/H Bar, Forging etc.

STANDARD	UNS	WNR.	JIS
SS 410	S41000	1.4550	SUS 410

STANDARD

UNS

WNR.

JIS

SS 410

S41000

1.4550

SUS 410

Diameter or Width (mm)	Weight per meter	Sectional Area	Perimeter
5.0	0.20	0.15	0.25	0.20	2.0	1.57
5.5	0.24	0.19	0.30	0.24	2.2	1.78
6.0	0.28	0.22	0.36	0.28	2.4	1.88
7.0	0.38	0.30	0.49	0.38	2.8	2.20
8.0	0.50	0.39	0.64	0.50	3.2	2.51
9.0	0.64	0.50	0.81	0.64	3.6	2.83
10	0.73	0.63	1.00	0.79	4.0	3.14
11	0.95	0.75	1.21	0.95	4.4	3.46
12	1.13	0.89	1.44	1.13	4.8	3.77
14	1.54	1.21	1.96	1.54	5.6	4.40
16	2.01	1.58	2.56	2.01	6.4	5.03
18	2.54	2.00	3.24	2.54	7.2	5.65
20	3.14	2.47	4.00	3.14	8.0	6.28
22	3.80	2.98	4.84	3.80	8.8	6.91
25	4.91	3.85	6.25	4.91	10.0	7.85
28	6.15	4.83	7.84	6.16	11.2	8.80
32	8.04	6.31	10.24	8.04	12.8	10.05
36	10.17	7.99	12.96	10.18	14.4	11.31
40	12.56	9.86	16.00	12.57	16.0	12.57
45	15.90	12.49	20.25	15.90	18.0	14.14
50	19.62	15.41	25.00	19.64	20.0	15.71
56	24.62	19.34	31.36	24.63	22.4	17.59
63	31.16	24.47	36.69	31.17	25.2	19.79
71	39.57	31.08	50.41	39.59	28.4	22.31
80	50.24	39.46	64.00	50.27	32.0	25.13

Diameter or
Width
(mm)

Weight per meter

Sectional Area

Perimeter

Square
(kg)

Round
(kg)

Square
(cm²)

Round
(cm²)

Square
(cm)

Round
(cm)

5.0

0.20

0.15

0.25

0.20

2.0

1.57

5.5

0.24

0.19

0.30

0.24

2.2

1.78

6.0

0.28

0.22

0.36

0.28

2.4

1.88

7.0

0.38

0.30

0.49

0.38

2.8

2.20

8.0

0.50

0.39

0.64

0.50

3.2

2.51

9.0

0.64

0.50

0.81

0.64

3.6

2.83

0.73

0.63

1.00

0.79

4.0

3.14

0.95

0.75

1.21

0.95

4.4

3.46

1.13

0.89

1.44

1.13

4.8

3.77

1.54

1.21

1.96

1.54

5.6

4.40

2.01

1.58

2.56

2.01

6.4

5.03

2.54

2.00

3.24

2.54

7.2

5.65

3.14

2.47

4.00

3.14

8.0

6.28

3.80

2.98

4.84

3.80

8.8

6.91

4.91

3.85

6.25

4.91

10.0

7.85

6.15

4.83

7.84

6.16

11.2

8.80

8.04

6.31

10.24

8.04

12.8

10.05

10.17

7.99

12.96

10.18

14.4

11.31

12.56

9.86

16.00

12.57

16.0

12.57

15.90

12.49

20.25

15.90

18.0

14.14

19.62

15.41

25.00

19.64

20.0

15.71

24.62

19.34

31.36

24.63

22.4

17.59

31.16

24.47

36.69

31.17

25.2

19.79

39.57

31.08

50.41

39.59

28.4

22.31

50.24

39.46

64.00

50.27

32.0

25.13

Metric	US Bar	ASTM/ Canadian	Japanese
Bar Size	Diam. (mm)	Bar Size	Diam. (Inch)	Bar Size	Diam. (mm2)	Bar Size	Diam. (mm)
5	5	#2	0.250	10M	100	6	6
5.5	5.5	#3	0.375	15M	200	10	10
6	6	#4	0.500	20M	300	13	13
7	7	#5	0.625	25M	500	16	16
8	8	#6	0.750	30M	700	19	19
9	9	#7	0.875	35M	1000	22	22
10	10	#8	1.000	45M	1500	25	25
11	11	#9	1.125	55M	2500	29	29
12	12	#10	1.250			32	32
14	14	#11	1.375			35	35
16	16	#12	1.500			38	38
18	18	#13	1.625			41	41
20	20	#14	1.750			44	44
22	22	#15	1.875			48	48
25	25	#16	2.000			51	51
28	28	#18	2.250			57	57
32	32
36	36
40	40
44	44
50	50

Metric

US Bar

ASTM/ Canadian

Japanese

Bar Size

Diam. (mm)

Bar Size

Diam. (Inch)

Bar Size

Diam. (mm2)

Bar Size

Diam. (mm)

0.250

10M

100

5.5

0.375

15M

200

0.500

20M

300

0.625

25M

500

0.750

30M

700

0.875

35M

1000

1.000

45M

1500

1.125

55M

2500

#10

1.250

#11

1.375

#12

1.500

#13

1.625

#14

1.750

#15

1.875

#16

2.000

#18

2.250

Size in Inches	Wt per Ft	Wt per 12′
3/16″	0.104	1.248
1/4″	0.180	2.160
5/16″	0.290	3.480
3/8″	0.420	4.920
7/16″	0.560	6.72
1/2″	0.740	8.880
9/16″	0.930	11.16
5/8″	1.150	13.80
11/16″	1.390	16.68
3/4″	1.660	19.92
13/16″	1.950	23.40
7/8″	2.300	27.60
15/16″	2.600	31.20
1″	2.90	34.80
1-1/16″	3.30	39.60
1-1/8″	3.700	44.40
1-1/4″	4.600	55.20
1-5/16″	5.100	61.20
1-3/8″	5.600	67.20
1-7/16″	6.100	73.20
1-1/2″	6.600	79.20
1-5/8″	7.800	93.60
1-3/4″	9.030	108.36
1-7/8″	10.400	124.80
2″	11.80	141.60
2-1/4″	14.920	179.04
2-3/8″	16.920	203.04
2-1/2″	18.42	221.04
3″	26.53	318.36

Size in Inches

Wt per Ft

Wt per 12′

3/16″

0.104

1.248

1/4″

0.180

2.160

5/16″

0.290

3.480

3/8″

0.420

4.920

7/16″

0.560

6.72

1/2″

0.740

8.880

9/16″

0.930

11.16

5/8″

1.150

13.80

11/16″

1.390

16.68

3/4″

1.660

19.92

13/16″

1.950

23.40

7/8″

2.300

27.60

15/16″

2.600

31.20

1″

2.90

34.80

1-1/16″

3.30

39.60

1-1/8″

3.700

44.40

1-1/4″

4.600

55.20

1-5/16″

5.100

61.20

1-3/8″

5.600

67.20

1-7/16″

6.100

73.20

1-1/2″

6.600

79.20

1-5/8″

7.800

93.60

1-3/4″

9.030

108.36

1-7/8″

10.400

124.80

2″

11.80

141.60

2-1/4″

14.920

179.04

2-3/8″

16.920

203.04

2-1/2″

18.42

221.04

3″

26.53

318.36

Flat Bar Sizes in mm	Flat Bar Size (inch)	Flat Bar Thickness (mm)	Flat Bar Thickness (in Inches)
22	7/8	17 & 18	2/3 – 5/7
25	1	5 to 20	3/16 – 4/5
30	1-3/16	5 to 20	3/16 – 4/5
32	1-1/4	6 to 20	1/4 – 4/5
35	1-3/8	5 to 20	3/16 – 3/16
40	1-4/7	5 to 25	3/16 – 1
45	1-7/9	5 to 25	3/16 – 1
47	1-6/7	17,25 & 32	2/3, 1 & 1-1/4
50	2	5 to 32	3/16 – 1-1/4
55	2-1/16	5 to 25	3/16 – 1
57	2-1/4	32	1-1/4
60	2-3/8	5 to 35	3/16 – 1-3/8
63	2-1/2	10 to 30	3/8 – 1-3/16
65	2-5/9	10 to 30 & 35	3/8 – 1-3/16, & 1-3/8
70	2-3/4	6 to 25 & 40	1/4 – 1, & 1-4/7
75	3	8 to 25	5/16 – 1
80	3-1/8	8 to 20	5/16 – 4/5
90	3-1/2	8 to 20	5/16- 4/5
100	4	8, 10, 12	5/16, 3/8, 1/2

Flat Bar Sizes in mm

Flat Bar Size (inch)

Flat Bar Thickness (mm)

Flat Bar Thickness (in Inches)

7/8

17 & 18

2/3 – 5/7

5 to 20

3/16 – 4/5

1-3/16

5 to 20

3/16 – 4/5

1-1/4

6 to 20

1/4 – 4/5

1-3/8

5 to 20

3/16 – 3/16

1-4/7

5 to 25

3/16 – 1

1-7/9

5 to 25

3/16 – 1

1-6/7

17,25 & 32

2/3, 1 & 1-1/4

5 to 32

3/16 – 1-1/4

2-1/16

5 to 25

3/16 – 1

2-1/4

1-1/4

2-3/8

5 to 35

3/16 – 1-3/8

2-1/2

10 to 30

3/8 – 1-3/16

2-5/9

10 to 30 & 35

3/8 – 1-3/16, & 1-3/8

2-3/4

6 to 25 & 40

1/4 – 1, & 1-4/7

8 to 25

5/16 – 1

3-1/8

8 to 20

5/16 – 4/5

3-1/2

8 to 20

5/16- 4/5

100

8, 10, 12

5/16, 3/8, 1/2

Square bar Size	KG’s per Metre	Standard Length (metres)	Colour Code
10 x 10	0.81	6.0	Yellow
12 x 12	1.16	6.0	Pink
16 x 16	2.06	6.0	Grey
20 x 20	3.22	6.0	Green
25 x 25	5.03	6.0	Purple
32 x 32	8.24	6.0	Orange
40 x 40	12.8	6.0	Yellow
50 x 50	20.12	6.0	Green

Square bar Size

KG’s per Metre

Standard Length (metres)

Colour Code

10 x 10

0.81

6.0

Yellow

12 x 12

1.16

6.0

Pink

16 x 16

2.06

6.0

Grey

20 x 20

3.22

6.0

Green

25 x 25

5.03

6.0

Purple

32 x 32

8.24

6.0

Orange

40 x 40

12.8

6.0

Yellow

50 x 50

20.12

6.0

Green

Diameter	Weight Chart	Dia	Weight Chart
(mm)	per metre (kg)	(in)	per metre (kg)
3mm	0.06	1/8″	0.06
4mm	0.10	3/16″	0.14
5mm	0.16	1/4″	0.25
6mm	0.22	5/16″	0.39
7mm	0.30	3/8″	0.56
8mm	0.40	7/16″	0.77
10mm	0.62	1/2″	1.00
12mm	0.89	9/16″	1.22
14mm	1.22	5/8″	1.56
15mm	1.40	11/16″	1.89
16mm	1.59	3/4″	2.25
18mm	2.01	7/8″	3.07
20mm	2.48	1″	4.03
22mm	3.00
24mm	3.57
25mm	3.88

Diameter

Weight Chart

Dia

Weight Chart

(mm)

per metre (kg)

(in)

per metre (kg)

3mm

0.06

1/8″

0.06

4mm

0.10

3/16″

0.14

5mm

0.16

1/4″

0.25

6mm

0.22

5/16″

0.39

7mm

0.30

3/8″

0.56

8mm

0.40

7/16″

0.77

10mm

0.62

1/2″

1.00

12mm

0.89

9/16″

1.22

14mm

1.22

5/8″

1.56

15mm

1.40

11/16″

1.89

16mm

1.59

3/4″

2.25

18mm

2.01

7/8″

3.07

20mm

2.48

1″

4.03

22mm

3.00

24mm

3.57

25mm

3.88

Grade	C	Mn	Si	P	S	Cr	Ni
410	0.15 max	1.00 max	1.00 max	0.04 max	0.03 max	min: 11.5 max: 13.5	0.50 max

Grade

410

0.15 max

1.00 max

0.04 max

0.03 max

min: 11.5
max: 13.5

0.50 max

Tensile Strength ksi (MPa) min	Yield Strength 0.2% offset ksi (MPa) min	Elongation (% in 50mm) min	Hardness (Brinell) MAX	Hardness (Rockwell B) MAX
65 (450)	30 (205)	20	217	96

Tensile Strength ksi (MPa) min

Yield Strength 0.2% offset ksi (MPa) min

Elongation (% in 50mm) min

Hardness (Brinell) MAX

Hardness (Rockwell B) MAX

65 (450)

30 (205)

217

CD	Cold drawn	P	Polished
BD	Bright drawn	SRE	Slit rolled edge
CG	Centreless ground	HF	Hot finished
CF	Cold finished	HRAP	Hot rolled annealed and pickled
P&T	Peeled and turned	RT	Rough turned/peeled
ST	Smooth turned	PR	Peeled and reeled

Stainless Steel 410 Round Bars

410 Stainless Steel Round Bars, Stainless Steel 410 Bright Bar, ASTM A276 SS 410 Hex Bar, 410 Stainless Steel Rectangular Bar, SS 410 Hollow Bars Supplier in Mumbai, India.

Grade

UNS

WERKSTOFF NR.

ASTM / ASME

Buy 410 Stainless Steel Round Bar, Stainless Steel 410 Square Bar, SS 410 Flat Bar, UNS S41000 Threaded Bar, ASTM A276 Type 410 Rod, SS 410 Rods Dealer, DIN 1.4550 Forged Bar, SS 410 Bars, SS 410 Hot Rolled Bar Manufacturer in India.

Standard Quality Specification Of SS 410 Round Bars

Available Types Of SS 410 Round Bars

SS 410 Flat Bar

SS 410 Square Bar

SS 410 Bright Bar

SS 410 Hex Bar

SS 410 Rectangular Bar

SS 410 Forged Bar

Equivalent Grade Of 410 Stainless Steel Round Bars

SS 410 Round Bars Surface Finish

Manufacturer of Stainless Steel 410 Round Bars, SS 410 Hex Bar Wholesaler, 410 SS Flat Bar Price in India.

Check ASTM A276 SS 410 Round Bars & 410 Stainless Steel Threaded Bar Weight Chart & Dimensions.

Dimensions Of Hot Rolled Stainless Steel 410 Round Bar

Stainless Steel 410 Round Bar Size Chart

Standard Sizes Stainless Steel 410 Hex Bar

Stainless Steel 410 Flat Bar Size

Size chart of SS 410 Square Bar

410 SS Round Bar Weight Chart

Chemical Composition of 410 SS Round Bars

Mechanical Properties of SS 410 Round Bars

Other Types Of Stainless Steel 410 Round Bars

SS 410 Round Bars SUPPLYING TO FOLLOWING REGIONS & COUNTRIES

Official info:

LOCATION